Standard Remote ID Archives - DroneScout

DroneBeacon db300 Blue UAS approved Remote ID module (MAVLink/DroneCAN)

bluemark — Thu, 18 Dec 2025 13:44:04 +0000

This module is a Remote ID transmitter and can be used to have a standard Remote ID solution as required by the FAA for new drones. It is similar to the db201 module, it has both a MAVLink and two DroneCAN interfaces. It has a u.FL antenna connector and an antenna is included. The module can be integrated into your drone (product) that uses ArduPilot or PX4.

The db300 is “Blue UAS” approved. This means that the module fulfills the drone requirements set by
the U.S. Department of Defense/War for government use, ensuring they meet strict security and
operational standards. The db300 has been approved on July 10th 2026 and can be found on the official framework list: https://tyrionprod.servicenowservices.com/gsp?id=framework_list search for db300

Specifications

Remote ID transmission protocols
Bluetooth dual-mode (Bluetooth 4 Legacy + Bluetooth 5 Long Range)
FCC/CE certified radio module
*u-blox BMD-345
*Nordic nRF52840 radio
* External PA 24 dB
Transmit frequency:
* 2.4 GHz
Transmit power
* up to +18 dBm (FCC certified)
Antenna: 2 dBi omni-directional antenna with IPEX connector (included)
Compliant with international regulation
(+20 dBm EIRP / 100 mW with the included 2 dBi antenna)
*EU ASD-STAN DIN EN 4709-002
*USA ASTM Remote ID Standard ASTM F3411-22a-RID-B/ F3586-22
Connectivity:
*2x JST GH 4-pin CAN (DroneCAN) port
CAN 2.0 (1 Mbps) / CAN FD (up to 8 Mbps)
120 ohm termination: solder pad
*1x JST GH 6-pin TELEM (UART/MAVLink) port
57600 baud rate (can be configured to different baudrate)

Power: +5V supplied from TELEM or CAN port
LED lights: power (white) and status LED (red)
Fastening mechanism: 4x M2 screws (20 x 20 mm grid)
Size: 27.5 x 27.5 x 5 mm
Weight: 2.5 g (excluding antenna)
Operating temperature: -40°C to +85°C
NDAA: Sections 848 and 889, plus Blue UAS approval

The post DroneBeacon db300 Blue UAS approved Remote ID module (MAVLink/DroneCAN) appeared first on DroneScout.

DroneBeacon MAVLink/DroneCAN db201 standard RemoteID transponder

bluemark — Wed, 15 Mar 2023 15:50:30 +0000

This module is a standard RemoteID transponder and is the best choice if you do not need a blue UAS ready module. If you need a blue UAS ready module, please buy our db300 instead.

It has both a MAVLink and two DroneCAN interfaces. The db201 has a u.FL antenna connector and an antenna is included. The module can be integrated into your drone (product) that uses ArduPilot or PX4.

Product Page

The post DroneBeacon MAVLink/DroneCAN db201 standard RemoteID transponder appeared first on DroneScout.

DroneBeacon MAVLink db202mav standard RemoteID transponder

bluemark — Wed, 15 Mar 2023 15:45:13 +0000

This is a cost-effective standard RemoteID transponder with only a MAVLink interface that can be integrated into your drone (product). The module has an IPEX3 antenna connector and no antenna is included! This is smaller compared to an u.FL connector.

An IPEX3 antenna can be bought here (or Adafruit).

If you need a DroneCAN interface or want a module with more connection options, choose the db201 module instead.

Product Page

The post DroneBeacon MAVLink db202mav standard RemoteID transponder appeared first on DroneScout.

DroneBeacon MAVLink/DroneCAN db210pro standard RemoteID transponder

bluemark — Fri, 14 Oct 2022 10:15:16 +0000

This is a standard RemoteID transponder with two TELEM interfaces and two DroneCAN interfaces. It is based on the powerful ESP32-S3 chip. The db210 has a u.FL antenna connector and an antenna is included. The module can be integrated into your drone (product) that uses ArduPilot or PX4 (in progress).

More information will be added soon.

The post DroneBeacon MAVLink/DroneCAN db210pro standard RemoteID transponder appeared first on DroneScout.

DroneBeacon DroneCAN db203can standard RemoteID transponder

bluemark — Thu, 15 Sep 2022 15:46:06 +0000

This is a cost-effective standard RemoteID transponder with only a DroneCAN interface that can be integrated into your drone (product). The module has an IPEX3 antenna connector and an antenna is included. IPEX3 is smaller compared to an u.FL connector.

If you need a MAVLink interface or want a module with more connection options, choose the db201 module instead.

Product Page

The post DroneBeacon DroneCAN db203can standard RemoteID transponder appeared first on DroneScout.