DroneBeacon MAVLink/DroneCAN
Remote ID transponder

DroneBeacon MAVLink/DroneCAN product family is a so-called direct or broadcast Remote ID long-range transponder that can be integrated into drone products. The products run open-source firmware (ArduRemoteID) and provides a so-called standard Remote ID solution. The products are designed for drone manufacturers, system integrators or DIY enthusiasts.  It is compliant with the (upcoming) international standards and has a FCC/CE approved radio module. Furthermore, the transponder is optimized for long range due to its transmit power.

 

These products primarily target UAV manufacturers as you need do you own approval process at the FAA (DoC submission). Of course, we can support you with this. For customer that need an approved FAA Remote ID module, please buy the db120 with battery or the db121/db122fpv product.

 

Products

  • db201

    the best choice for most users. Specifications

  • db202mav

    a cost effective solution with one MAVLink port. Specifications

  • db203can

    db203can: a cost effective solution with one DroneCAN port. Specifications

  • db210pro

    db210pro: a feature-rich solution with the powerful ESP32-S3 chip Specifications

Open source

The module runs the open source ArduRemoteID firmware and we are part of the development team. It means that you can flash newer firmware releases using the webinterface. Remote ID and this module are supported by ArduPilot since version 4.x. (Check the ArduPilot project to use the correct software version.) PX4 has support for Remote ID in version PX4 v1.14 and newer. See this link for more information:
https://docs.px4.io/main/en/peripherals/remote_id.html 

standard Remote ID vs Remote ID broadcast module

In the USA, the FAA defined two Remote ID product classes: a) standard Remote ID and b) Remote ID broadcast module.

Standard Remote ID products communicate with the flight controller and allow to fly BVLOS (Beyond Visual Line Of Sight). A second advantage is that the pilot can view the Remote ID status in flight control software such as Mission Planner or QGroundControl. On the other hand, Remote ID broadcast module are stand-alone products and are only allowed for VLOS flight (Visual Line of Sight).

The DroneBeacon MAVLink/DroneCAN product family is a standard Remote ID solution.

Certified manufacturing

The DroneBeacon MAVLink/DroneCAN product family are produced with high quality and environmental standards:

FAA ready

For the USA market, manufacturers must begin producing UAS with built-in standard RID starting December 16, 2022. Our module is FAA ready and we can support you with the DoC (Declartion of Compliance) submission.

Specifications

DroneBeacon db201 transponder

Best choice for most users. (Drop-in replacement for the db200 module that is End of Life.)

Buy me      Manual    3D model

 

Short-range radio

Bluetooth and WiFi 2.4GHz, output power (ERP): + 20 dBm (100 mW)

FCC/CE certified radio module (ESP32C3 based)

Antenna

3 dBi omni-directional antenna (IPEX connector) included

Power

+5V supplied from TELEM or CAN port

Firmware

open source ArduRemoteID, supports OTA firmware upgrade via the web interface

Connectivity

2x JST GH 4-pin CAN (DroneCAN) port

1x JST GH 6-pin TELEM (MAVlink, UART) port

LED lights

power and status LED

CAN termination resistors

yes (software controlled)

Fastening mechanism

4x M2 screws

IP rating

none

Operating temperature

-40 °C to 85 °C

Dimensions

38 x 32 x 5 mm (without antenna)

Weight

5 grams (without antenna)

DroneBeacon db202mav transponder

Cost-effective solution with only 1 MAVLink port.

Buy me      Manual    3D model

 

Short-range radio

Bluetooth and WiFi 2.4GHz, output power (ERP): + 20 dBm (100 mW)

FCC/CE certified radio module (ESP32C3 based)

Antenna

no antenna provided. The antenna connector is IPEX3 (not u.FL) An IPEX3 antenna can be bought  here (or Adafruit).

Power

+5V supplied from TELEM port

Firmware

open source ArduRemoteID, supports OTA firmware upgrade via the web interface

Connectivity

1x JST GH 6-pin TELEM (MAVlink, UART) port

LED lights

power and status LED

Fastening mechanism

4x M2 screws: 20 x 20 mm grid

IP rating

none

Operating temperature

-40 °C to 85 °C

Dimensions

26 x 26 x 5 mm (without antenna)

Weight

2.6 grams (without antenna)

DroneBeacon db203can transponder

Cost-effective solution with only 1 DroneCAN port.

Buy me      Manual    3D model

 

Short-range radio

Bluetooth and WiFi 2.4GHz, output power (ERP): + 20 dBm (100 mW)

FCC/CE certified radio module (ESP32C3 based)

Antenna

3 dBi omni-directional antenna included The antenna connector is IPEX3 (not u.FL)

Power

+5V supplied from CAN port

Firmware

open source ArduRemoteID, supports OTA firmware upgrade via the web interface

Connectivity

1x JST GH 4-pin CAN (DroneCAN) port

LED lights

power and status LED

Fastening mechanism

4x M2 screws: 20 x 20 mm grid

IP rating

none

Operating temperature

-40 °C to 85 °C

Dimensions

31 x 26 x 5 mm (without antenna)

Weight

2.8 grams (without antenna)

DroneBeacon db210pro transponder

Feature-rich solution with 2 MAVLink ports and 2 DroneCAN ports.

Buy me      Manual    3D model

 

Short-range radio

Bluetooth and WiFi 2.4GHz, output power (ERP): + 20 dBm (100 mW)

FCC/CE certified radio module

Powerful dual-core Espressif ESP32S3 chip with 16 MB flash and 8 MB PSRAM

Antenna

3 dBi omni-directional antenna (IPEX (u.FL) connector) included

Power

+5V supplied from TELEM or CAN port

Firmware

open source ArduRemoteID, supports OTA firmware upgrade via the web interface

Connectivity

2x JST GH 4-pin CAN (DroneCAN) port 

2x JST GH 6-pin TELEM (MAVlink, UART) port

1x Buzzer OUT

6x spare GPIO pins

LED lights

power LED and 2x color status LED

CAN termination resistors

yes (software controlled)

Fastening mechanism

4x M2 screws: 25 x 25 mm grid

IP rating

none

Operating temperature

-40 °C to 85 °C

Dimensions

42 x 33 x 5 mm (without antenna)

Weight

6 grams (without antenna)

DroneBeacon db110 transponder (legacy)

For most users, the db200 is the preferred choice. Smaller, cheaper and more features.

Short-range radio

Bluetooth and WiFi 2.4GHz, output power (ERP): + 20 dBm (100 mW)

Antenna

2 dBi antenna (SMA connector)

Power

5V (UART connector or USB-C, current: 50 to 100 mA (depends on transmission mode))

UART

4-port screw terminal, settings configurable (baud rate, stop bits, parity, data bits)

LED lights

charging, configuration mode

Enclosure

plastic (PETG)

Fastening mechanism

3M Dual-lock or M5 screws using the screw noses

PCB-only version: M2 screws

IP rating

none, (it is waterproof if the UART connector is sealed.)

Operating temperature

-5°C to +40°C

Dimensions

99 x 66.5 x 11.5 mm (without antenna). With antenna, the height is 42 mm

PCB-only version: 78 x 63 x 10 mm (without antenna). With antenna, the height is 40 mm

Weight

33 grams

PCB-only version: 20 grams

db110 MAVLink transponder

db110 MAVLink transponder PCB-only version