DroneBeacon db153fpv RemoteID tiny Broadcast Module 19×14 mm
The DroneBeacon db153fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder without GNSS receiver that can be mounted on a drone.
€ 59,00 ex. VAT
28 in stock
![db153fpv_front db153fpv_front](https://dronescout.co/wp-content/uploads/2024/06/db153fpv_front.webp)
![db153fpv_back db153fpv_back](https://dronescout.co/wp-content/uploads/2024/06/db153fpv_back.webp)
![db153fpv_weight db153fpv_weight](https://dronescout.co/wp-content/uploads/2024/06/db153fpv_weight.webp)
![db153fpv_front_coin db153fpv_front_coin](https://dronescout.co/wp-content/uploads/2024/06/db153fpv_front_coin.webp)
![db153fpv_side db153fpv_side](https://dronescout.co/wp-content/uploads/2024/06/db153fpv_side.webp)
![db153fpv_foxeer_m10q db153fpv_foxeer_m10q](https://dronescout.co/wp-content/uploads/2024/06/db153fpv_foxeer_m10q.webp)
![db153fpv_package db153fpv_package](https://dronescout.co/wp-content/uploads/2024/06/db153fpv_package.webp)
The DroneBeacon db153fpv is a tiny, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones, only 19 x 14 mm and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.
It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX).
It relays the GNSS information via the GPS out connector to the flight controller. All connectors are solder pads on a 1.27 mm grid. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the + and – solder pads (4.75 to 15V). The size of the board is only 19 x 14 mm and the weight is just 2 grams (including antenna).