DroneBeacon db152fpv RemoteID Broadcast Module 20×20 M3
The DroneBeacon db152fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder without GNSS receiver that can be mounted on a drone.
€ 59,00 ex. VAT
12 in stock
![db152fpv_front db152fpv_front](https://dronescout.co/wp-content/uploads/2024/06/db152fpv_front.webp)
![db152fpv_back db152fpv_back](https://dronescout.co/wp-content/uploads/2024/06/db152fpv_back.webp)
![db152fpv_weight db152fpv_weight](https://dronescout.co/wp-content/uploads/2024/06/db152fpv_weight.webp)
![db152fpv_side db152fpv_side](https://dronescout.co/wp-content/uploads/2024/06/db152fpv_side.webp)
![db152fpv_front_coin db152fpv_front_coin](https://dronescout.co/wp-content/uploads/2024/06/db152fpv_front_coin.webp)
Expected shipping: July 10th 2024.
The DroneBeacon db152fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones with 20 x 20 M3 holes and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.
It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX).
It relays the GNSS information via the GPS out connector to the flight controller. The connectors are 6-pin JST-SH 1 mm. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the VCC pin of the GPS OUT port (4.75 to 15V). The db152fpv has a 20 x 20 grid with M3 holes for easy installation. The size of the board is 27 x 27 mm and the weight is 2.9 gram (including antenna).