DroneBeacon db152fpv RemoteID Broadcast Module 20×20 M3

EAN: 8785276651164

DroneBeacon db152fpv RemoteID Broadcast Module 20×20 M3

The DroneBeacon db152fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder without GNSS receiver that can be mounted on a drone.

Compare

 59,00 ex. VAT

30 in stock

Expected shipping: July 10th 2024.

The DroneBeacon db152fpv is a small, but powerful (direct/broadcast) stand-alone Remote ID transponder for drones with 20 x 20 M3 holes and needs an external GNSS receiver. It is designed for FPV drones and supports any GNSS receiver with NMEA or UBX (u-blox) protocol. Of course, it can be used for other drones as well.

It is a PCB and needs an external GNSS (GPS) receiver (NMEA or UBX). 

It relays the GNSS information via the GPS out connector to the flight controller. The connectors are 6-pin JST-SH 1 mm. An antenna is provided (WLAN/BLE). The board and attached GNSS receiver are powered via the VCC pin of the GPS OUT port (4.75 to 15V). The db152fpv has a 20 x 20 grid with M3 holes for easy installation. The size of the board is 27 x 27 mm and the weight is 2.9 gram (including antenna).

Product Page  Manual